• Samir Tambe, “Liquid Jets Injected into Non-Uniform Crossflow,” June 2010.

• Bassam Mohammad Adb El-Nabi, “Single Annular Combustor: Experimental Investigations of Aerodynamics, Dynamics and Emissions,” January 2010.

• Yongqiang Fu, “Aerodynamics and Combustion of Axial Swirlers,” January 2008.

• Omar Elshamy, “Experimental Investigations of Steady and Dynamic Behavior of Transverse Liquid Jets,” November 2006.

• Jun Cai, “Aerodynamics of Lean Direct Injection Combustor With Multi-Swirler Arrays,” April 2006.

• Ahmed ELKady, “Experimental Investigation of Aerodynamics, Combustion, and Emissions Characteristics within the Primary Zone of a Gas Turbine Combustor,” November 2005.



• Eric Burroughs, “Development of a High-Resolution Mechanical Spray Patternator for the Characterization of Fuel Sprays,” November 2005.

• Raghava Lakhamraju, “Liquid Jet Breakup Studies in Subsonic Airstream at Elevated Temperatures,” May 2005.

• Samir Tambe, “Liquid Jets in Subsonic Crossflow,” November 2004.

• Nicholas Flohre, “Experimental Investigation of Spray Atomization Properties of an Aircraft Engine Swirl Cup,” May 2003.


• B. Mohammad, J. Cai, and S.-M. Jeng, “Gas Turbine Combustor flow structure control through modification of chamber geometry,” Accepted for publication, Journal of Engineering for Gas Turbine and Power.

• B. Mohammad, S.-M. Jeng, and G. Andac, “Effect of geometry on the Aerodynamics of a prototype Gas Turbine Combustor,” Accepted for publication, Journal of Engineering for Gas Turbine and Power.

• A. ELKady, S.-M. Jeng, and H. Mongia, “Experimental Investigation of Temperature and Species Concentrations Characteristics of Swirling Spray Combustion," Submitted to Journal of Propulsion and Power.

• F. Ichihashi, J. Cai, Y.-H. Kao, A. Syd, and S.-M. Jeng, “Combustion Dynamics in a Gas Turbine Single Annular Combustor Sector,” ASME Turbo Expo, Glasgow, Scotland, June 2010.

• B. Mohammad and S.-M. Jeng, “Effect of geometry on the Aerodynamics of a prototype Gas Turbine Combustor,” ASME Turbo Expo, Glasgow, Scotland, June 2010.

• B. Mohammad, S.-M. Jeng, and G. M. Andac, “Influence of fuel injection and primary jets on the aerodynamics of a prototype Gas Turbine Combustor,” ASME Turbo Expo, Glasgow, Scotland, June 2010.

• S. Tambe and S.-M. Jeng, “Three-Dimensional Penetration and Velocity Distribution of Liquid Jets Injected Transversely into a Swirling Crossflow,” 22nd Annual Conference on Liquid Atomization and Spray Systems, Cincinnati, Ohio, May 2010.

• B. Mohammad, J. Cai, and S.-M. Jeng, “Gas Turbine Single Annular Combustor Sector Aerodynamics,” 48th AIAA Aerospace Sciences Meeting & Exhibit, Orlando, Florida, January 2010.

• J. Cai, F. Ichihashi, B. Mohammad, S. Tambe, Y.-H. Kao, and S.-M. Jeng, “Gas Turbine Single Annular Combustor Sector: Combustion Dynamics,” AIAA 2010-21, 48th AIAA Aerospace Sciences Meeting & Exhibit, Orlando, Florida, January 2010.

• B. Mohammad and S.-M. Jeng, “Design procedures and a Developed Computer Code for Preliminary Single Annular Combustor Design,” 45th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, Denver, Colorado, August 2009.

• S. Tambe, and S.-M. Jeng, “A Study of Liquid Jets Injected Transversely into a Swirling Crossflow,” 21st Annual Conference on Liquid Atomization and Spray Systems, Orlando, Florida, May 2008.

• S. Tambe, O. Elshamy, and S.-M. Jeng, “Liquid Jets Injected Transversely into a Shear Layer,” 45th AIAA Aerospace Sciences Meeting & Exhibit, Reno, Nevada, January 2007.

• O. Elshamy, S. Tambe, J. Cai, and S.-M. Jeng, “PIV and LDV Measurements for Liquid Jets in Crossflow,” 45th AIAA Aerospace Sciences Meeting & Exhibit, Reno, Nevada, January 2007.

• O. Elshamy, S. Tambe, J. Cai, and S.-M. Jeng, “Excited Liquid Jets in Subsonic Crossflow,” 45th AIAA Aerospace Sciences Meeting & Exhibit, Reno, Nevada, January 2007.

• S. Tambe, O. Elshamy, and S.-M. Jeng, “Spray Properties of Liquid Jets Injected Transversely into a Shear Layer,” 43rd AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, Cincinnati, Ohio, July 2007.

• J. Cai, Y. Fu, S.-M. Jeng, and H. Mongia, “Experimental Study on Coherent Structures of a Counter-rotating Multi-Swirler Cup,” AIAA 2007-5674, 43rd AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, Cincinnati, Ohio, July 2007.

• Y. Fu, J. Cai , S.-M. Jeng, and H. Mongia, “Characteristics of the swirling flow generated by a counter-rotating swirler,” AIAA 2007-5690, 43rd AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, Cincinnati, Ohio, July 2007.

• O. Elshamy, S. Tambe, J. Cai, and S.-M. Jeng, “Structure of Liquid Jets in Subsonic Crossflow at Elevated Ambient Pressures,” 44th AIAA Aerospace Sciences Meeting & Exhibit, Reno, Nevada, January 2006.

• A. ELKady, S.-M. Jeng, and H. Mongia, “The Influence of The Primary Air Jets on Flow and Pollutant Emissions Characteristics within A Model Gas Turbine Combustor,” 44th AIAA Aerospace Sciences Meeting & Exhibit, Reno, Nevada, January 2006.

• A. ELKady, S.-M. Jeng, and H. Mongia, “A Parametric Study on the Effect of the Primary Air Jets on Pollutant Emissions within an Engine Swirl Cup,” 44th AIAA Aerospace Sciences Meeting & Exhibit, Reno, Nevada, January 2006.

• A. ELKady, S.-M. Jeng, and H. Mongia, “The Role of the Interactions Between the Primary Jets and the Recirculation Zone of a Model Gas Turbine Combustor on Flame Stability and Emissions,” IMECE2005-82167, ASME International Mechanical Engineering Congress and Exposition, Orlando, Florida, November 2005.

• Y. Fu, J. Cai, S.-M. Jeng, and H. Mongia, “Reacting Spray Structure of a Counter-Rotating Swirl Cup,” GT2005-68490, ASME Turbo Expo, Reno-Tahoe, Nevada, June 2005.

• Y. Fu, J. Cai, S.-M. Jeng, and H. Mongia, “Confinement Effects on Non-reacting Flow-field Generated by a Counter-rotating Swirl Cup,”GT-2005-68622, ASME Turbo Expo, Reno-Tahoe, Nevada, June 2005.

• A. ELKady, S.-M. Jeng, and H. Mongia, “Experimental Investigation of Temperature and Species Concentrations Characteristics of Swirling Spray Combustion,” AIAA-2005-1425, 43rd AIAA Aerospace Sciences Meeting & Exhibit, Reno, Nevada, January 2005.

• J. Cai, S.-M. Jeng and R. Tacina, “The Structure of a Swirl-Stabilized Reacting Spray Issued from an Axial Swirler,” AIAA 2005-1424, 43rd AIAA Aerospace Sciences Meeting & Exhibit, Reno, Nevada, January 2005.

• S. Tambe, S.-M. Jeng, H. Mongia, and G. Hsiao, “Liquid Jets in Subsonic Crossflow,” 43rd AIAA Aerospace Sciences Meeting & Exhibit, Reno, Nevada, January 2005.

• Y. Fu, J. Cai, A. ELKady, and S.-M. Jeng, “Fuel and Equivalence Ratio Effects on Spray Combustion of a Counter-rotating Swirler,” AIAA 2005-0354, 43rd AIAA Aerospace Sciences Meeting & Exhibit, Reno, Nevada, January 2005.

• O. Elshamy and S.-M. Jeng, “Study of Liquid Jet in Crossflow at Elevated Ambient Pressures,” 18th Annual Conference on Liquid Atomization and Spray Systems, 2005.

• A. ELKady, J. Cai, Y. Fu, H. Mongia, and S.-M. Jeng, “Effect of Confinement Size on Swirler Cup Aerodynamics,” AIAA-2003-0487, 41st Aerospace Sciences Meeting & Exhibit, Reno, Nevada, January 2003.

• J. Cai, Y. Fu, A. Elkady, S.-M. Jeng, and H. Mongia, “Swirl cup modeling, IV – effect of confinement on flow characteristics,” AIAA 2003-0486, 41st Aerospace Sciences Meeting & Exhibit, Reno, Nevada, January 2003.

• J. Cai, S.-M. Jeng, and E. Steinthorsson, “Experimental and Numerical Investigation of a Macro-Laminated Radial Swirler,” AIAA 2003-0826, 41st Aerospace Sciences Meeting & Exhibit, Reno, Nevada, January 2003.

• J. Cai, S.-M. Jeng, and R. Tacina, “Multi-Swirler Aerodynamics: Comparison of Different Configurations,” GT-2002-30464, ASME Turbo Expo, Amsterdam, Holland, June 2002.

• J. Cai, S.-M. Jeng and R. Tacina, “Multi-Swirler Aerodynamics: Experimental Measurements,” AIAA-2001-3574, 37th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, Salt Lake City, Utah, July 2001.

• A. Iannetti, R. Tacina, S.-M. Jeng, and J. Cai, “Towards accurate prediction of turbulent, three-dimensional, recirculating flows with the NCC,” AIAA 2001-809, 39th Aerospace Sciences Meeting & Exhibit, Reno, Nevada, January 2001.